Well 1 Type Column

Well Type 1 columns were first introduced in version 1 of the program and can be used for very simple well displays. All of the well information is represented by bitmaps, which can be customized by the user. This type of well column cannot be used for wells with multiple piezometers or varying casing diameters, and cannot contain annotation.

The data for a Well Type 1 column consists of:

• water depth,
• well depth,
• type of surface cap (above ground, flush mount, or stand pipe),
• type of bottom cap (plug, cap, open), and
• layers of risers and screens.

Note that the water depth, well depth, and types of top and bottom caps are the same for all of the well layers and need to be entered only once. The type of surface and bottom cap will be graphically depicted at the top and bottom of the monitoring well.

Well Type 1 data can be entered and edited by:

• selecting the Well Data submenu of the Edit menu and the selecting the name of the well column,
• clicking the right mouse button and select the Well Data submenu from the popup menu and then selecting the name of the well column, or
• clicking the left mouse button inside the well column of the borehole log.

After performing one of the above tasks, the Well Type 1 Data form will be displayed. This form has two tabs; one for the water and general well data and one for specifying the risers and screens.