|
|
|
|
|
Well Type 3 columns are a new feature in this version of WinLoG and can be used to represent complicated well details. Almost all of the well information is drawn to scale; including casings, screens, covers, caps, and miscellaneous fittings. This type of well column can contain multiple piezometers, casings, and screens with variable diameters, annotation, and multiple water depths. Besides being able to represent very complicated wells, this type of well column is also very easy to use and is recommended for most well displays.
This data can be entered individually for each log or by using a well macro. Well macros can be used to quickly add standard well components, water level information, and text annotation to a log. Macros can be used for single well installation, complex nested wells, above-ground well casings, etc. All well macros are stored as Type 3 wells.
The data for a Well Type 3 column consists of:
Well Type 3 data can be entered and edited by:
After performing one of the above tasks, the Well Type 3 Data form will be displayed. This form has four tabs; one for the hole diameter and layout, one for specifying the components, one for specifying the water levels, and one for specifying the annotation.
Before entering the details for the well, the hole diameter and layout of the well should be entered. If a well macro is to be used it should be selected first by pressing the Use Well Macro button.
Well macros can also be created after the well data has been input for a log, using the "Save as Well Macro" button on the "Well" form. When this button is pressed a form will be displayed where you can specify the name of the well macro.