|
|
|
|
|
If the user selects the Use Default Template button then the Select AGS Borehole form is displayed on the screen. WinLoG will automatically generate a template based on the AGS data file.
The Select AGS Borehole form displays the list of all boreholes that are available for importing from the AGS file the users wants to import. The user has the option to select one or more boreholes to import at a time. The user can select a single borehole by left clicking on a borehole and clicking OK. To select multiple boreholes, the user must hold down the Ctrl key and click on multiple boreholes. Then click OK to continue Importing.
Next, the AGS Default Template Setup form will be displayed after the boreholes to import have been selected. This form has two tabs.
Data Format Tab
The following information can be entered on the Data Format tab:
Scaling Factor: The user can select either to scale the template / Log as either Depth / Page or by using a depth scale.
Depth / Page: If Depth/Page is selected for the Scaling Factor, then the Depth/Page field will be displayed. This value scales the template / log as a number of metres per page. For example if this value is 20, then there will be 20 metres per page on the log(right).
1 to ___: If Depth Scale is selected for the Scaling Factor, then the 1 to ___ field will be displayed. This would allow the depth scale to 1m on screen is equal to ___ metres in real life.
Page Setup Tab
The following information can be entered on the Page Setup tab:
Size: This is the page size of the template. When the arrow at the right is pressed, a list of available page sizes is displayed.
Inches or Millimetres: The units for the width and length of the page. These units will be used when specifying the layout of the legend. If the Page Size is "Custom", the units can be set to either inches or millimetres.
Custom Width: If the page size is specified as "custom", the page horizontal width in inches must be specified.
Custom Length: If the page size is specified as "custom", the page vertical length in inches must be specified.
Orientation: This is the orientation of the page; either portrait (longer side is vertical) or landscape (longer side is horizontal).
After the Ok button is pressed the new template will be displayed.
When this template is saved the Enter Template Name form will be displayed. This form shows the current templates in the database. To save the template, enter a unique name for the new template and press the Ok button.
Finally, the imported logs should open up on the screen.