|
|
|
|
|
If you selected to Use a Default Template previously, the Default LogPlot Template Format Form will be displayed after you select the LogPlot file to import. This form has two tabs, one for the Data Format and one for the Page Setup.
Data Format Tab
The following information can be entered on the Data Format tab:
Input Units: The user can select to have the input units as either feet or metres.
Output Units: The user can select to have the output units as either feet or metres.
Scaling Factor: The user can select either to scale the template / Log as either Depth / Page or by using a depth scale.
Depth / Page: If Depth/Page is selected for the Scaling Factor then the Depth/Page field will be displayed. This value scales the template / log as a number of metres per page.
1 to ___: If Depth Scale is selected for the Scaling Factor then the 1 to __ field will be displayed. This would allow the depth scale to 1m on screen is equal to ___ metres in real life.
Page Setup Tab
The following information can be entered on the Page Setup tab:
Size: This is the page size of the template. When the arrow at the right is pressed, a list of available page sizes is displayed.
Inches or Millimetres: The units for the width and length of the page. These units will be used when specifying the layout of the legend. If the Page Size is "Custom", the units can be set to either inches or millimetres.
Custom Width: If the page size is specified as "custom", the page horizontal width in inches must be specified.
Custom Length: If the page size is specified as "custom", the page vertical length in inches must be specified.
Orientation: This is the orientation of the page; either portrait (longer side is vertical) or landscape (longer side is horizontal).
When this template is saved the Enter Template Name form shown to the right will be displayed. This form shows the current templates in the database. To save the template, enter a unique name for the new template and press the Ok button.
The imported logs should open up on the screen after the template has been saved.