|
<< Click to Display Table of Contents >> Adding a Sample |
  
|
|
<< Click to Display Table of Contents >> Adding a Sample |
|
There are three methods to add a sample directly in EDMS Field.
1.Use the Create button on the Stations and Samples tab for a task.
2.Select File > New > Sample > Locate on Map or click on the New button on the main toolbar and select Sample > Locate on Map.
3.Select File > New > Sample > Locate Manually or click on the New button on the main toolbar and select Sample > Locate Manually.
If the first two methods are used, you will be required to click on the location of the sample on the project map to specify the x and y coordinates.In the third method these coordinates are entered manually on the Sample Information form. After one of the three methods has been used, a Sample Information form will be displayed where the data can be entered as described in the Editing a Sample section below.