Access Rights Tab

<< Click to Display Table of Contents >>

Navigation:  Chapter 7 Stations and Sampling > Samples > Editing a Sample >

Access Rights Tab

Previous pageReturn to chapter overviewNext page

The Access Rights tab is used to control who can view and edit the sample.  If the sample was created from a task or station, this information is inherited from the task or station.

 

clip40919

 

The following can be edited on this tab:

 

Restricted: Check this box to restrict access to the sample, uncheck to not restrict access.

 

Type: This is used to control the type of access to the sample. Access can be controlled by either Personnel or Privilege Level. This field not appear if the Restricted box is unchecked.

 

Privilege Level: If the Type is set to Privilege Level, this will be visible and is used to select the privilege level required to access the sample. There are four privilege levels; administrator, power, limited, and guest. Anyone with the required or higher privilege level will be able to access the sample.  

 

Personnel: If the Type is set to Personnel, this will be visible and is used to select the personnel that can access the sample. The personnel in the list can be added and removed using the Add and Remove buttons. When the Add button is pressed the Personnel form is displayed and the personnel can be selected as described in the Personnel section. When the Remove button is pressed the selected personnel will be removed from the list.