Point Load Correlations

<< Click to Display Table of Contents >>

Navigation:  Chapter 9 Geotechnical Data Management > Lookup List Data > Rock List Data >

Point Load Correlations

Previous pageReturn to chapter overviewNext page

When specifying some rock tests the point load correlation factor can be selected. The point load correlation factors can be specifying by selecting Tools > GDMS > Rock > Point Load Correlations. The Point Load Correlation Factors form will be displayed.

 

clip40267

 

The point load correlation factors can be specified for axial, diametral, block, and irregular specimen types. These correlation factors can be specified either for all depths/diameters or for specified depths/diameters. If the correlation factors are specified by depth/diameter the depths/diameters can be specified in millimeters or inches. Depths/diameters can be added and removed using the buttons on the form.