Adding a Station

<< Click to Display Table of Contents >>

Navigation:  Chapter 4 Stations >

Adding a Station

Previous pageReturn to chapter overviewNext page

There are three methods to add a station directly in EDMS Field.

 

1.Use the Create button on the Stations and Samples tab for a task.

2.Select File > New > Station > Locate on Map or click on the New button on the main toolbar and select Station > Locate on Map.

3.Select File > New > Station > Locate Manually or click on the New button on the main toolbar and select Station > Locate Manually.

 

If the first two methods are used, you will be required to click on the location of the station on the project map to specify the x and y coordinates.In the third method these coordinates are entered manually on the Station Information form. After one of the three methods has been used, a Station Information form will be displayed where the data can be entered as described in the Editing a Station section below.